Espressif Systems /ESP32-S3 /LEDC /CH1_CONF0

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as CH1_CONF0

Description

Configuration register 0 for channel 1

Fields

TIMER_SEL	This field is used to select one of timers for channel %s. 0: select timer0 1: select timer1 2: select timer2 3: select timer3
SIG_OUT_EN	Set this bit to enable signal output on channel %s.
IDLE_LV	This bit is used to control the output value when channel %s is inactive (when LEDC_SIG_OUT_EN_CH%s is 0).
PARA_UP	This bit is used to update LEDC_HPOINT_CH%s, LEDC_DUTY_START_CH%s, LEDC_SIG_OUT_EN_CH%s, LEDC_TIMER_SEL_CH%s, LEDC_DUTY_NUM_CH%s, LEDC_DUTY_CYCLE_CH%s, LEDC_DUTY_SCALE_CH%s, LEDC_DUTY_INC_CH%s, and LEDC_OVF_CNT_EN_CH%s fields for channel %s, and will be automatically cleared by hardware.
OVF_NUM	This register is used to configure the maximum times of overflow minus 1. The LEDC_OVF_CNT_CH%s_INT interrupt will be triggered when channel %s overflows for (LEDC_OVF_NUM_CH%s + 1) times.
OVF_CNT_EN	This bit is used to enable the ovf_cnt of channel %s.
OVF_CNT_RESET	Set this bit to reset the ovf_cnt of channel %s.
OVF_CNT_RESET_ST	This is the status bit of LEDC_OVF_CNT_RESET_CH%s.

Links

() ()